PVC Recycling Production Line (Crushing and Milling)
- HOME
- SOLUTION
PVC Recycling Production Line (Crushing and Milling)
01 Belt Conveyor
Transport materials into the crusher during the production. Automatic feeding method,to save labor cost.
Including Max angle is 40, ensure the entering design without any issues.
Equip with the lateral fences along with the belt conveyor at the both sides.
02 Vertical Crusher
Material is coming in from the belt conveyor, Then material enter into the crusher,
the final size is lcm, and suitable for next milling processing.
The original noise of the equipment is below 60 db:
03 Screw Conveyor
Transport crushed materials into the buffer silo.
05 Screw Conveyor * 2
Transport crushed materials into the feeding machine.
04 Buffer Silo
Crusher materials comes into the
silo.
Tank volume is bigger than theflow of the material on the screwconveyor.
06 Feeding Machine *2
Transport crushed materials into the rotary miller.
Speed can be adjusted to avoidany blocking in the rotary miller.
07 Rotary Miller
Material is coming in, being milled to a final size of 1mm;
More than 1mm material will return to the rotary miller.
The final result will be transferred by the cyclone system into the vibrating sieve until pass the 1mm mesh size.
08 Dust Collector
The materials dusty generate by the rotary miller, will be collected by the pulse dust collector.
The filtering accuracy is up to 99% .